Precision Plasma LLC recommends Hypertherm plasma cutters
due to the long consumable life and excellent cut quality.
Hypertherm cut quality pictures below
PRECISION PLASMA LLC - ALL RIGHTS RESERVED 2017
Which plasma cutter should I use?
Any plasma cutter can work, but Precision Plasma LLC recommends a Hypertherm 45
for up to 1/2" material. You will need to order a CPC port to allow for computer control.
If you run a hand torch, you will also need to jumper the second and third pin used on
the front side of the plasma torch socket or the orange and yellow wire on the back
side of the torch socket.